Filter Design
Thursday, February 5, 2009
Applications in which the new C60 from Cypher Instruments may be used include filter design and testing, component evaluation, cross talk and CMRR measurements and many others.
We would highly recommend the C60 for people who are looking into or are heavily involved in filter design. With the C60 you can test the filters that you have designed to determine the amplitude response for both the high and low pass of the 4th order, the low pass of the 8th order as well as the 8kHz filter design module.
If you are going to design a filter which will incorporate a state of controllable voltage and the control range varying between 1 and 100 our C60 will offer a frequency range between 19kHz and 1.5MHz. The C60 provides the filter designer with 4 separate outputs being low pass, high pass, band pass and variable notch.
As well as being an essential item for filter design, our new C60 helps with a wide range of other applications such as measuring the amplitude and phase response of the frequency of many different network applications that use electronic, acoustic and electrical signal outputs.
You can measure the impedance of two totally different network terminals including the phase impedance output, if you use electro-acoustic transducers this product will aid you greatly in both the design and production of these products.
For people involved in bio-chemicals the C60 is ideal for measuring the impedance of the chemicals that you will be using, filter design and testing personnel will find this product a must to have in their laboratory or work place, the C60 will also benefit people who require the testing of the impedance of batteries on a daily basis.
We would highly recommend the C60 for people who are looking into or are heavily involved in filter design. With the C60 you can test the filters that you have designed to determine the amplitude response for both the high and low pass of the 4th order, the low pass of the 8th order as well as the 8kHz filter design module.
If you are going to design a filter which will incorporate a state of controllable voltage and the control range varying between 1 and 100 our C60 will offer a frequency range between 19kHz and 1.5MHz. The C60 provides the filter designer with 4 separate outputs being low pass, high pass, band pass and variable notch.
As well as being an essential item for filter design, our new C60 helps with a wide range of other applications such as measuring the amplitude and phase response of the frequency of many different network applications that use electronic, acoustic and electrical signal outputs.
You can measure the impedance of two totally different network terminals including the phase impedance output, if you use electro-acoustic transducers this product will aid you greatly in both the design and production of these products.
For people involved in bio-chemicals the C60 is ideal for measuring the impedance of the chemicals that you will be using, filter design and testing personnel will find this product a must to have in their laboratory or work place, the C60 will also benefit people who require the testing of the impedance of batteries on a daily basis.
Labels: filter design
